Sun Microsystems Fire X4800 Installation Manual Download Page 82

Page: 82 / 142

Find the screws from the front of shipping bracket that match your rack and use them to fasten
the bezel into the rack.

The front shipping bracket contains eight threaded holes used for storing unused screws (four
M6 and four 10-32). Remove the screws that match the threads on your rack and use them to
secure the server to the rack.

Thread the long screws that you removed in Step 2 into the matching empty holes on the
shipping bracket.

They will be stored there in case you need to reinstall the shipping bracket.

Installing and Removing the Universal Rack Mounting Kit Shipping Brackets

Sun Fire X4800 Server Installation Guide • —12, March 2011

Summary of Contents for Fire X4800















































































































































Search results

Summary of Contents for Fire X4800

Reviews:

Related manuals for Fire X4800

Brands by name

Popular brands

Sun Microsystems Fire X4800, Installation Manual

Search results

Summary of Contents for Fire X4800

Reviews:

Related manuals for Fire X4800

Brands by name

Popular brands