Sun Microsystems Fire X4800, Installation Manual

Page: 117 / 142

■
Apply standby power to the server by connecting AC power to the system power supply. See
“How to Apply Standby Power for Initial Service Processor Configuration” on page 97 .
Type the IP address of the ILOM SP in the browser locator box and press Enter. For example, if the
IP address for your ILOM SP is 129.144.02.20, you would enter it as shown:
Log in to the web interface using the default user name,
root
, and the default password,
changeme
.
Connecting to the System Console
There are three different ways to connect to the system console.
■
Physical console. See “How to Connect to the Server Locally (Physical Console)” on
page 117 .
■
Remote console through the ILOM web interface. See “How to Connect Remotely Using the
ILOM Web Interface” on page 118 .
■
Serial console through the ILOM command-line interface. See “How to Connect to the
Host’s Serial Console Using the ILOM Command-Line Interface” on page 118 .
▼
How to Connect to the Server Locally (Physical Console)
If you plan to interact with the system console directly, make the connections described in this
procedure. See
“Attaching Administration (SP) Cables” on page 91 for the locations of the
system connectors.
1
2
Connecting to the System Console
117