Sun Microsystems Fire X4800, Installation Manual

Page: 53 / 142

a. Mark all PCIe EM cards with their slot locations.
Caution –
To prevent system failure, you must return PCIe EM cards to their original
locations. Mark PCIe EM slot locations carefully before removing them from the chassis.
b. Rotate the lever to release the module (1).
c. Slide the module out of the chassis (2).
Remove the upper left fan module (FM2) if necessary.
Squeeze the clamp (1) to release the fan module (2), then pull it from the chassis (3).
You can use the recess as a hand-hold when moving the chassis.
Caution –
Do not insert forks from a lift device into this open bay, as this causes severe and
non-repairable damage.
1
2
5
Installing the Server in a Rack Using the Universal Rack Mounting Kit
53