Inspur Yingxin User Manual Download

Page: 1 / 80

Dear User of Inspur Yingxin Server,

Heartfelt thanks for your use of Inspur Yingxin Server!

This manual introduces the technical characteristics, the system instal-

lation and setup of the server to help you to fully understand and expediently
use this server.

Please deliver the package of our product to the waste recycling station

for recycling in favor of pollution prevention and humankind’s benefit.

This manual is the property of Inspur Group Co., Ltd.
This User Manual is not to be copied by any group or person in any

manner without the consent of Inspur Group Co., Ltd. Inspur Group Co.,
Ltd. reserves the right of revising this manual momentarily.

Any alteration about the content of this manual will not be informed.
Please contact Inspur Group Co., Ltd. if you have any questions or ad-

vice about this manual.

Inspur Group Co., Ltd.
August, 2012

“Inspur” is registered trademark of Inspur Group Co., Ltd.
Other trademarks belong to other corresponding registered companies.

Summary of Contents for Yingxin

















































































Search results

Summary of Contents for Yingxin

Reviews:

Related manuals for Yingxin

Brands by name

Popular brands

Inspur Yingxin, User Manual

Search results

Summary of Contents for Yingxin

Reviews:

Related manuals for Yingxin

Brands by name

Popular brands