31
Chapter Five SAS RAID Setup
III Reset Disks to Non-RAID menu
After entering the configuration interface of SAS RAID, you can select the menu
by up and down arrows, and then press [Enter] key to enter the menu or input directly.
The system will display all hard disks in RAID volume. Please select hard disks
to be reset by [Space] key based on actual demand, and then reset hard disk by pressing
[Enter] key. The system will again warn whether there is a need to reset the hard disk,
and enter Y or N according to the prompts. It should note that when resetting the hard
disks, all data on hard disk will be lost, and at the same time the hard disk will never
again belong to RAID volume.
Ⅳ
Exit menu
After entering the configuration interface of SAS RAID, you can select the menu
by the up and down arrows, and then press [Enter key] to enter the menu.
System prompts: “Are you sure you want to exit? (Y/N):”. Enter “Y”, and then
it will exit the configuration interface of SAS RAID. If entering “N”, it will cancel the
operation and exit.
