Sun Microsystems Blade X6450 Service Manual Download Page 124

Page: 124 / 162

3-50

Sun Blade X6450 Server Module Service Manual • May 2009

FIGURE 3-26

Removal of the SSD

6. To remove the SSD, slide it out of the mounting bracket.

7. Slide the replacement SSD into the mounting bracket so that the screw holes in

the SSD face upward.

8. Align the four screw holes in the SSD with four holes in the mounting bracket

and secure the SSD to the mounting bracket using the four screws.

9. Attach the cable to the SSD.

The cable is keyed for correct installation.

10. If necessary, install the Sun Blade RAID Expansion Module (see

“To Install a

RAID Expansion Module” on page 3-35

3.4.8

Replacing the Motherboard (FRU)

The motherboard is shipped installed in a server module enclosure. Do

not

remove

the motherboard from the enclosure. Instead, remove components from the old
motherboard and enclosure assembly, and install these components into the new
motherboard and enclosure assembly.

Summary of Contents for Blade X6450



































































































































































Search results

Summary of Contents for Blade X6450

Reviews:

Related manuals for Blade X6450

Brands by name

Popular brands

Sun Microsystems Blade X6450, Service Manual

Search results

Summary of Contents for Blade X6450

Reviews:

Related manuals for Blade X6450

Brands by name

Popular brands