Sun Microsystems Blade X6450, Service Manual

Page: 144 / 162

5-6 Sun Blade X6450 Server Module Service Manual • May 2009
6. In your browser’s address bar, type the IP address of the SP.
For example:
http://
xxx.xxx.xxx.xxx
Where
xxx.xxx.xxx.xxx
is the IP address of the SP.
The ELOM web interface login screen appears.
7. Log in as root or as a user account with administrator privileges.
The ELOM main screen appears.
8. From the main menu, click Remote Power Control tab.
The Remote Power Control submenu screen appears.
9. Click the Power Off radio button, and click Submit.
10. From the main menu, click the Maintenance tab.
The Maintenance submenu screen appears.
11. Click Enter Upgrade Mode.
12. Click Browse and select the
CPLD_V
#
.jbc
file that you saved in
Step 4
.
13. Click the Upgrade CPLD button to start the upgrade process.
14. Wait until the upgrade is finished.
15. Remove and insert the server to allow the new CPLD to take effect.
You need to apply AC power to the server for the new CPLD to take effect.
5.1.5 Updating the REM Firmware
The following procedure describes how update the RAID expansion module (REM)
firmware using a DOS-bootable USB flash drive. To perform this procedure, you will
need:
■
DOS-bootable USB flash drive
■
A system with internet access, a USB connector, and (optional) a write-capable
CD/DVD drive
■
A blank CD-R or CD-RW disk (optional)
■
Multi-port dongle cable
■
A USB keyboard
■
A monitor
You can also update the REM firmware using the procedures in the Sun StorageTek
RAID Software Manager User’s Guide .