Sun Microsystems Blade X6450, Service Manual

Page: 116 / 162

3-42 Sun Blade X6450 Server Module Service Manual • May 2009
FIGURE 3-20
Installation of a Fabric Expansion Module
5. Gently press the connector on the underside of the fabric expansion module
onto the connector on the motherboard, until the edge of the board is secured
by the ejector clip on the left-side support bracket.
The fabric expansion module is installed.
▼
To Remove a Fabric Expansion Module
1. Power off the server and remove the server module from the chassis as
described in “To Remove the Server Module From the Chassis” on page 3-13 .
Caution – Do not operate the system with empty slots. Always insert a filler into an
empty slot to reduce the possibility of module shutdown.