Sun Microsystems Blade X6450, Service Manual

Page: 70 / 162

2-40 Sun Blade X6450 Server Module Service Manual • May 2009
FIGURE 2-32
Location of Jumpers J19 and J44 on the Motherboard.
10. If your server module is revision 2 and does not have low voltage DIMMs,
move the jumper cap on J51 from pins 1 and 2 (default position) to pins 2 and 3
(see
FIGURE 2-33
).
Depending on the type DIMMs installed in your server module, the jumper cap
might already set to pins 2 and 3.
J19
J44