Sun Microsystems Blade X6450, Service Manual

Page: 153 / 162

Appendix B BIOS Power-On Self-Test (POST) Codes B-5
■
Warning or Not an Error – The message appears on the screen. An error record is
logged to the system event log (SEL). The system continues booting with a
degraded state. The user might want to replace the unit.
■
Pause – The message appears on the screen, an error is logged to the SEL, and user
input is required to continue. The user can take immediate corrective action or
choose to continue booting.
■
Halt – The message appears on the screen, an error is logged to the SEL, and the
system cannot boot unless the error is resolved. The user needs to replace the
faulty part and restart the system.
TABLE B-1
Error Messages and Responses
Error Code Error Message Response
0000 Timer Error Pause
0003 CMOS Battery Low Pause
0004 CMOS Settings Wrong Pause
0005 CMOS Checksum Bad Pause
000B CMOS memory size Wrong Pause
000C RAM R/W test failed Pause
000E A: Drive Error Pause
000F B: Drive Error Pause
0012 CMOS Date/Time Not Set Pause
0040 Refresh Timer Test Failed Halt
0041 Display Memory Test Failed Pause
0042 CMOS Display Type Wrong Pause
0043 ~<INS> Pressed Pause
0044 DMA Controller Error Halt
0045 DMA-1 Error Halt
0046 DMA-2 Error Halt
0047 Unknown BIOS error. Error code = 0047 Halt
0048 Password Check Failed Halt
0049 Unknown BIOS error. Error code = 0049 Halt
004A Unknown BIOS error. Error code = 004A Pause
004B Unknown BIOS error. Error code = 004B Pause
004C Keyboard/Interface Error
005D S.M.A.R.T. Command Failed