Sun Microsystems Blade X6450, Service Manual

Page: 89 / 162

Chapter 3 Maintaining the Server 3-15
Caution – Damage to system components can occur through improper handling.
Observe the proper ESD precautions when handling the CPU. Wear a securely
grounded ESD wrist strap. Handle components by the edges only. Do not touch
metal contacts.
▼
To Remove the Main Cover
1. Press down on the cover release button and, using the indent for leverage, slide
the main cover toward the rear of the chassis approximately 0.5 inch (12 mm).
See
FIGURE 3-4
.
2. Grasp the cover by its rear edge and lift it straight up from the chassis.
FIGURE 3-4
Removing the Main Cover
▼
To Insert the Server Module
1. Locate the desired slot in the chassis.