Subaru Crosstrek 2022, Owner'S Manual

Page: 295 / 475

3. Remove the grip portion of the screw-
driver.
4. While depressing the brake pedal,
insert a screwdriver into the hole, move it
right and left while pushing the shift lock
release button using a screwdriver, and
then move the select lever.
If the select lever does not move after
performing the above procedure, the shift
lock system may be malfunctioning. Con-
tact a SUBARU dealer for an inspection
as soon as possible.
&
Driving tips
CAUTION
If the accelerator and brake pedals
are depressed at the same time,
driving torque may be restrained.
This is not a malfunction.
.
Always apply the foot or parking brake
when the vehicle is stopped in the
“
D
”
or
“
R
”
position.
.
Always apply the parking brake when
parking your vehicle. Do not hold the
vehicle with only the mechanical friction
of the transmission.
.
Do not keep the vehicle in a stationary
position on an uphill grade by using the
“
D
”
position. Use the brake instead.
.
The engine may, on rare occasions,
knock when the vehicle rapidly acceler-
ates or rapidly pulls away from a standstill.
This phenomenon does not indicate a
malfunction.
Power steering
&
Power steering warning light
&
Power steering system fea-
tures
The vehicle is equipped with an electric
power steering system. When the ignition
switch is turned to the
“
ON
”
position, the
power steering warning light on the
combination meter illuminates to inform
the driver that the warning system is
functioning properly. Then, if the engine
started, the warning light turns off to inform
the driver that the steering power assist is
operational.
Starting and operating/Power steering
–
CONTINUED
–
7-29