Subaru Crosstrek 2022, Owner'S Manual

Page: 330 / 475

Starting and operating/Reverse Automatic Braking System
When the OFF setting is shown, the
corresponding setting is OFF.
Touch and hold the OFF setting key to turn
the setting ON.
When the Reverse Automatic Braking
system is turned OFF, the following
indicator will illuminate.
RAB OFF indicator: illuminates when the
Reverse Automatic Braking system is turned
OFF.
RAB OFF indicator will turn off when the
Reverse Automatic Braking system is
turned ON.
NOTE
.
When the settings cannot be chan-
ged, the ON/OFF setting key will be
grayed out.
.
The ON/OFF setting key may be
greyed out if the Reverse Automatic
Braking system malfunctions, etc. In
this case, turn the ignition switch to the
“
LOCK
”
/
“
OFF
”
position and then turn it
to the
“
ON
”
position again. If the
setting cannot be changed even after
turning the ignition switch to the
“
ON
”
position again, consult your SUBARU
dealer.
.
The settings will be restored as
follows when the select lever is shifted
to the
“
R
”
position next time.
–
Reverse Automatic Braking sys-
tem settings: default (ON setting)
–
Object detection warning beep-
ing sound: the setting selected by
operating the combination meter
display (color LCD)
Also, the following settings can be chan-
ged by operating the combination meter
display (color LCD).
.
Warning volume
.
Sonar audible alarm ON/OFF
For details, refer to
“
Menu screens
” F
3-
39.
&
RAB warning indicator
If the Reverse Automatic Braking System
malfunctions, the above indicator illumi-
nates on the combination meter. Contact
the nearest SUBARU dealer for details.
7-64