Subaru Crosstrek 2022, Owner'S Manual

Page: 189 / 475

The journey time indication flashes each
time a complete hour has elapsed. If the
display is giving a reading other than the
journey time, the display switches to the
journey time, flashes for 5 seconds, and
returns to its original reading each time a
complete hour has elapsed.
NOTE
The journey time is reset when the
ignition switch is turned to the
“
ACC
”
or
“
LOCK
”
/
“
OFF
”
position.
!
Average vehicle speed
1) When units in miles is selected
2) When units in km is selected
This display shows the average vehicle
speed since the trip meter was last reset.
Pressing the TRIP RESET switch toggles
the display between the average vehicle
speed corresponding to the A trip meter
display and the average vehicle speed
corresponding to the B trip meter display.
When either of the trip meter displays is
reset, the corresponding average vehicle
speed value is also reset.
NOTE
When either trip meter display is reset,
the average vehicle speed correspond-
ing to that trip meter display is not
shown until the vehicle has subse-
quently covered a distance of 1 mile
(or 1 km).
!
Turn off display of driving informa-
tion display
Select the blank space in the menu to exit
the driving information display selection.
NOTE
.
The average fuel consumption and
average vehicle speed are calculated
even while the driving information dis-
play is not displayed.
.
Even if you turn off the driving
information display, the display will
automatically turn on when the battery
voltage is disconnected and then re-
connected for battery replacement or
fuse replacement.
&
Outside temperature indica-
tor
1) U.S.-spec. models
2) Except U.S.-spec. models
The outside temperature indicator shows.
NOTE
.
The outside temperature indicator
shows the temperature around the
sensor. Therefore, the temperature in-
dication may differ from the actual
outside air temperature.
.
The temperature unit cannot be
changed.
Instruments and controls/Multi
–
function display (black and white)
–
CONTINUED
–
3-47