Subaru Crosstrek 2022, Owner'S Manual

Page: 169 / 475

Inside warning
chime
Outside warning
chime
Operation indicator
on push-button igni-
tion switch
Status Action
Ding,
ding ...
(intermittent)
— —
The driver
’
s door was opened while the
push-button ignition switch is
“
ACC
”
(in
CVT models, when the select lever is in
the
“
P
”
position).
Switch the push-button ignition switch to
“
OFF
”
, or close the driver
’
s door.
*When exiting the vehicle, be sure to
switch the push-button ignition switch to
“
OFF
”
.
The push-button ignition switch was
switched to
“
OFF
”
while the driver
’
s door
is open.
Close the driver
’
s door.
Ding
Short beep
(2 seconds)
—
Lockout warning:
An attempt was made to lock all doors
while the access key fob is left inside the
vehicle.
Take out the access key fob from the
vehicle, and lock the doors.
*The doors cannot be locked while the
access key fob is inside the vehicle.
*A chirp sound will be heard, and all doors
will be unlocked.
—
Short beep
(2 seconds)
—
Trunk lockout warning:
The trunk was closed with the access key
fob in it while all doors are locked (or
during the automatic lock time period)
(sedan).
Take out the access key fob from the
trunk, and close the trunk.
*By pressing the trunk opener button after
this warning chime sounds, the trunk can
be unlocked.
Access key fob lock-in warning:
The door lock sensor was touched while
the push-button ignition switch is
“
OFF
”
and the access key fob is inside the
vehicle.
Take out the access key fob from the
vehicle, and lock the doors.
*If the access key fob is inside the
vehicle, the doors cannot be locked.
—
Beep, beep, beep,
beep, beep
(5 times)
—
Door ajar warning:
The door lock sensor is touched while the
ignition switch is in the
“
OFF
”
position and
one of the doors including the rear gate is
opened.
Close the doors securely and lock them.
*If one of the doors including the rear gate
is opened, the doors cannot be locked.
Instruments and controls/Warning and indicator
–
CONTINUED
–
3-27