Subaru Crosstrek 2022, Owner'S Manual

Page: 213 / 475

ged from the high beam to the low beam.
–
When your vehicle passes an on-
coming vehicle suddenly in a blind
curve
–
When another vehicle passes in
front of your vehicle
–
When an oncoming vehicle or ve-
hicle ahead comes in and out of view
because of continuous curves, median
strips, roadside trees, etc.
.
If the stereo camera detects the light of
the front fog lights of an oncoming vehicle,
the headlight mode may change from the
high beam to the low beam automatically.
.
The headlight mode may change from
the high beam to the low beam, or the low
beam mode may continue, when affected
by a street light, traffic signal, illumination
of an advertisement board, or a reflective
object such as a road sign and signboard.
.
The timing of the change of headlight
mode may differ due to the following
factors.
–
Color or brightness of the head-
lights of an oncoming vehicle or the tail
lights of a vehicle ahead
–
The headlights of the oncoming
vehicle or the tail lights of the vehicle
ahead are covered with mud, snow,
etc.
–
Movement and direction of an on-
coming vehicle or a vehicle ahead
–
When the headlights of an oncom-
ing vehicle or the tail lights of a vehicle
ahead illuminate on only one side
–
When the oncoming vehicle or
vehicle ahead is a motorcycle
–
Conditions of a road (slope, curve,
road surface, etc.)
–
Number of passengers and weight
of loaded cargo
–
Limitation of the detection ability of
the stereo camera
&
Daytime running light system
WARNING
When the daytime running lights are
illuminated, the tail lights do not
illuminate. When it becomes dark
outside, turn the light switch to the
“ ”
position to illuminate the head-
lights and tail lights. This will im-
prove visibility and allow other dri-
vers to see your vehicle more easily.
The daytime running lights will automati-
cally illuminate when the following condi-
tions are fulfilled.
.
The engine is running.
.
The parking brake is fully released.
.
The light control switch is in the
“
AUTO
”
(if equipped),
“ ”
or off position.
.
For CVT models, the select lever is in a
position other than the
“
P
”
position.
NOTE
When the light switch is in the
“ ”
position, the instrument panel illumina-
tion, front side marker lights, tail lights
and license plate lights are also illumi-
nated.
Instruments and controls/Light control switch
3-71