Subaru Crosstrek 2022, Owner'S Manual

Page: 392 / 475

Maintenance and service/Clutch fluid (MT models)
Alcohol contained in the brake
fluid may damage them.
.
Be careful not to spill brake fluid
when adding it. If brake fluid
touches the exhaust pipe, it may
cause a bad smell, smoke, and/or
a fire. If brake fluid gets on the
exhaust pipe, be sure to wipe it
off.
1)
“
MAX
”
level line
2)
“
MIN
”
level line
A) The brake fluid level must be checked in
this area.
Check the fluid level monthly.
Check the fluid level on the outside of the
reservoir. Be sure to check the fluid level
for the brake system at the
shaded area
in the illustration . For MT models, this
reservoir is used for both the brake and
clutch systems and has chambers for
each system.
If the fluid level is below
“
MIN
”
, add the
recommended brake fluid to
“
MAX
”
. Use
only brake fluid from a sealed container.
&
Recommended brake fluid
Refer to
“
Fluids
” F
12-7.
CAUTION
Never use different brands of brake
fluid together. Also, avoid mixing
DOT 3 and DOT 4 brake fluids even if
they are the same brand.
Clutch fluid (MT models)
&
Checking the fluid level
WARNING
Never let clutch fluid contact your
eyes because clutch fluid can be
harmful to your eyes. If clutch fluid
gets in your eyes, immediately flush
them thoroughly with clean water.
For safety, when performing this
work, wearing eye protection is
advisable.
CAUTION
.
Clutch fluid absorbs moisture
from the air. Any absorbed moist-
ure can cause improper clutch
operation.
.
If the vehicle requires frequent
refilling, there may be a leak. If
you suspect a problem, have the
vehicle checked at your SUBARU
dealer.
.
When clutch fluid is added, be
careful not to allow any dirt into
the tank.
.
Never splash the clutch fluid over
painted surfaces or rubber parts.
11-16