Subaru Crosstrek 2022, Owner'S Manual

Page: 280 / 475

Starting and operating/Starting and stopping engine (models with push
–
button start system)
the engine.
&
Stopping engine
1. Stop the vehicle completely.
2. Move the select lever to the
“
P
”
position (CVT models).
3. Press the push-button ignition switch.
The engine will stop, and the power will be
switched off.
WARNING
.
Do not touch the push-button
ignition switch during driving.
When the push-button ignition
switch is operated as follows,
the engine will stop.
–
The switch is pressed and held
for 3 seconds or longer.
–
The switch is pressed briefly 3
times or more in succession.
When the engine stops, the brake
booster will not function. A great-
er foot pressure will be required
on the brake pedal.
The power steering system will
not operate either. A greater
force will be required to steer,
and it may result in an accident.
.
If the engine stops during driving,
do not operate the push-button
ignition switch or open any of the
doors until the vehicle is stopped
in a safe location. It is dangerous
because the steering lock may be
activated. Stop the vehicle in a
s a f e p l a c e , a n d c o n t a c t a
SUBARU dealer immediately.
CAUTION
For CVT models
.
Do not stop the engine while the
select lever is in a position other
than the
“
P
”
position.
.
If the engine is stopped while the
select lever is in a position other
than the
“
P
”
position, the power
will be in
“
ACC
”
. If the vehicle is
left in this condition, the battery
may be discharged.
NOTE
Although you can stop the engine by
operating the push-button ignition
switch, do not stop the engine during
driving except in an emergency.
&
When access key fob does
not operate properly
Refer to
“
Access key fob
–
if access key
fob does not operate properly
” F
9-18.
7-14