Subaru Crosstrek 2022, Owner'S Manual

Page: 220 / 475

Instruments and controls/Wiper and washer
NOTE
Windshield washer fluid warning light
The windshield washer fluid warning
light illuminates when the washer fluid
level in the tank has dropped to the
lower limit. If the warning light illumi-
nates, refill the tank with fluid. For the
refilling procedure, refer to
“
Wind-
shield washer fluid
” F
11-29.
&
Rear window wiper and
washer switch (5-door mod-
els)
:
Washer operation (accompanied by
wiper operation)
: Continuous operation
: Intermittent operation
: Off
:
Washer operation (accompanied by
wiper operation)
!
Rear wiper
With the switch turned to the
“ ”
posi-
tion, the rear wiper will operate intermit-
tently at intervals corresponding to the
vehicle speed. In this position, when you
move the select lever to the
“
R
”
position
(CVT models) or the shift lever to the
reverse position (MT models), the rear
wiper will switch to continuous operation.
When you move the select lever/shift lever
from the
“
R
”
(reverse) position to another
position, the rear wiper will return to
intermittent operation.
Reverse gear interlocked rear wiper:
Even if the rear wiper switch is in the off
“ ”
position, if the front windshield wiper is
operating continuously, the rear wiper will
operate intermittently when you move the
select lever/shift lever to the
“
R
”
(reverse)
position.
The factory setting (default setting) of the
reverse gear interlocked rear wiper is as
follows.
.
U.S.-spec. models: Non-operational
.
Other models: Operational
This setting can be changed by a
SUBARU dealer. Consult your SUBARU
dealer for details.
CAUTION
Do not attach anything that disturbs
the rear wiper operation on the rear
gate. Doing so may damage the rear
wiper when it operates.
3-78