Subaru Crosstrek 2022, Owner'S Manual

Page: 115 / 475

registration will be canceled.
!
Registration for a PIN code
For example, to register
“
32468
”
as the
PIN code, perform the following proce-
dure.
1. Press the trunk opener button (sedan)/
rear lock button (5-door models) three
times.
2. After a chirp sounds once, press the
trunk opener button (sedan)/rear lock
button (5-door models) twice.
3. After a chirp sounds once, press the
trunk opener button (sedan)/rear lock
button (5-door models) four times.
4. After a chirp (ding) sounds once, press
the trunk opener button (sedan)/rear lock
button (5-door models) six times.
5. After a chirp (ding) sounds once, press
the trunk opener button (sedan)/rear lock
button (5-door models) eight times.
6. Perform steps 1 to 5 again within
approximately 30 seconds after the chirp
starts sounding intermittently.
7. All doors will be unlocked and locked.
Then the PIN code will be registered.
NOTE
.
Press the trunk opener button (se-
dan)/rear lock button (5-door models)
ten times to enter
“
0
”
.
.
Change the PIN code frequently to
protect your vehicle from theft.
.
If you have lent your vehicle to
another person, confirm that the PIN
code has not been changed or deleted.
If the PIN code has been changed or
deleted, reregister a new PIN code.
.
If you make an error during the
registration procedure, press the
“ ”
or
“ ”
button on the access key fob.
Then, start over from the procedure
described in
“
Preparation for register-
ing a PIN code
”
.
.
To protect your vehicle from theft,
you cannot register a string of the
same five numbers together, such as
“
00000
”
, nor
“
12345
”
as a PIN code.
.
Do not register your vehicle license
plate number or simple numbers such
as
“
11122
”
or
“
12121
”
as a PIN code.
Doing so will increase the risk of
vehicle theft.
.
When you try to register
“
22222
”
,
the registered PIN code will be deleted.
You cannot unlock the doors by PIN
Code Access until a new code is
registered.
.
After registering a new PIN code,
make sure that you can unlock the
doors using the PIN code.
.
The PIN code cannot be deleted
while the keyless access function is
disabled by operating the access key
fob.
.
Reregister the PIN code in the
following case.
–
when you forget the PIN code
–
when you want to change the PIN
code
!
Unlocking
Perform steps 1 to 5 described in
“
Regis-
tration for a PIN code
”
.
NOTE
.
You cannot unlock by PIN Code
Access in the following cases.
–
when the access key fob is within
the operating ranges
–
when the ignition switch is in the
“
ACC
”
or
“
ON
”
position
.
If you make an operation error
during the unlocking procedure, start
over with the unlocking procedure after
waiting for 5 seconds or longer.
.
To protect your vehicle from theft, a
buzzer will sound if incorrect PIN codes
are entered five times continuously. If
this occurs, you cannot unlock the
doors by PIN Code Access for 5
Keys and doors/Keyless access with push
–
button start system
–
CONTINUED
–
2-13