Subaru Crosstrek 2022, Owner'S Manual

Page: 153 / 475

while the ignition switch is in the
“
LOCK
”
/
“
OFF
”
or
“
ACC
”
position, the
fuel gauge will light up and indicate the
amount of fuel remaining in the tank.
The indicators will turn off when:
–
The TRIP RESET switch is not
operated for approximately 10 sec-
onds.
–
The driver
’
s door is opened and
then closed.
&
ECO gauge (if equipped)
1) Type A combination meter
2) Type B combination meter
The ECO gauge shows the difference
between the current rate of fuel consump-
tion and the average rate of fuel consump-
tion since the trip meter was last reset.
If the ECO gauge moves towards the +
side, this indicates better fuel efficiency.
NOTE
.
The ECO gauge shows only an
approximate indication of fuel effi-
ciency.
.
After resetting the trip meter, the
average rate of fuel consumption is not
shown until you have driven for 1 mile
(or 1 km). Before that time, the ECO
gauge does not operate.
&
Combination meter settings
Meter and vehicle settings can be set on
the combination meter.
!
Type A combination meter
Various adjustments can be made, such
as switching units shown on the combina-
tion meter and adjusting the warning tone
volume.
While the ignition switch is in the
“
OFF
”
position, each press of TRIP RESET
switch results in items shown in the table
below being switched.
Item
Combination
meter display
Possible
settings
A trip
—
B trip
—
Gauge
needle
sweep
function
On/Off
Changing
the unit*
mile/km
Warning
volume*
Lv. 1/Lv. 2/Lv. 3
*: if available
NOTE
.
If you switch the units on the
combination meter, the units on the
multi-function display (black and white)
also switches accordingly.
.
If either of the following conditions
is met, the combination meter setting
mode will be canceled.
–
The driver
’
s door is opened.
–
The TRIP RESET switch is not
operated for approximately 10 sec-
onds or more.
Instruments and controls/Meters and gauges
–
CONTINUED
–
3-11