Subaru 2004 LEGACY, Service Manual

Page: 591 / 609

PS-72
POWER ASSISTED SYSTEM (POWER STEERING)
Pipe Assembly [RHD Model]
6) Remove the air intake duct. <Ref. to
IN(H4DOTC)-9, REMOVAL, Air Intake Duct.>
<Ref. to IN(H4SO 2.0)-9, REMOVAL, Air Intake
Duct.>
7) Disconnect the suction hose and pressure hose
from the oil pump.
• Non-turbo model
• Turbo model
8) Disconnect the suction hose and return hose
from reservoir tank. Remove the oil cooler from oil
cooler bracket.
9) Remove the hose bracket and take out the hose
assembly from vehicle.
B: INSTALLATION
1) Temporarily tighten the bolt of hose bracket.
2) Install the resin clip to the pressure hose and
suction hose.
CAUTION:
Align the installation position of the resin clip
with the protector edge of suction hose.
• Non-turbo model
(1) Suction hose
(2) Pressure hose
(1) Reservoir tank
(2) Suction hose
(3) Return hose
(4) Oil cooler
(5) Oil cooler bracket
(1)
PS-00460
(2)
PS-00452
(2)
(1)
PS-00482
(1)
(3)
(2)
(5)
(4)
(1) Hose ASSY
(2) Hose bracket
(1) Hose ASSY
(2) Hose bracket
(1) Resin clip
(2) Protector
(3) Suction hose
(4) Pressure hose
PS-00451
(1)
(2)
PS-00451
(1)
(2)
PS-00455
(1)
(2)
(3)
(4)