Subaru 2004 LEGACY, Service Manual

Page: 338 / 609

VDC(diag)-16
VEHICLE DYNAMICS CONTROL (VDC) (DIAGNOSTICS)
Subaru Select Monitor
6. Subaru Select Monitor
A: OPERATION
CAUTION:
When the Subaru Select Monitor is communi-
cating (except when displaying the data), the
ABS warning light flashes and VDC warning
light illuminates in the combination meter. Do
not communicate with the Subaru Select Moni-
tor while driving, because the ABS and VDC
functions are disabled. Carefully drive the vehi-
cle, when you have to communicate with the
Subaru Select Monitor. When the data is dis-
played by the {Current Data Display & Save}
menu, both the ABS and VDC warning lights are
turned off and ABS and VDC functions are en-
abled.
1. READ DIAGNOSTIC TROUBLE CODE
(DTC)
1) Prepare the Subaru Select Monitor kit. <Ref. to
VDC(diag)-9, SPECIAL TOOL, PREPARATION
TOOL, General Description.>
2) Connect the diagnosis cable to Subaru Select
Monitor.
3) Insert the cartridge to Subaru Select Monitor.
<Ref. to VDC(diag)-9, SPECIAL TOOL, PREPA-
RATION TOOL, General Description.>
4) Connect the Subaru Select Monitor to data link
connector.
(1) Data link connector is located in the lower
portion of instrument panel (on the driver’s side).
(2) Connect the diagnosis cable to data link
connector.
CAUTION:
Do not connect the scan tools except for Suba-
ru Select Monitor.
5) Turn the ignition switch to ON (engine OFF) and
turn the Subaru Select Monitor switch to ON.
6) On the «Main Menu» display screen, select the
{Each System Check} and press the [YES] key.
7) On the «System Selection Menu» display
screen, select the {Brake Control} and press the
[YES] key.
8) Press the [YES] key after the {VDC AWD AT} is
displayed.
9) On the «VDC Diagnosis» display screen, select
the {Diagnostic Code(s) Display}, and then press
the [YES] key.
NOTE:
• For details concerning operation procedure, re-
fer to “SUBARU SELECT MONITOR OPERATION
MANUAL”.
• For details concerning DTCs, refer to “List of Di-
agnostic Trouble Code (DTC)”. <Ref. to VDC(di-
ag)-37, List of Diagnostic Trouble Code (DTC).>
• DTCs are displayed up to three in detected or-
der.
ABS00111
ABS00112
(1) Data link connector
(1) Power switch
ABS00465
(1)
ABS00114
(1)