Subaru 2004 LEGACY, Service Manual

Page: 547 / 609

PS-28
POWER ASSISTED SYSTEM (POWER STEERING)
Steering Gearbox [LHD Model]
4) Remove the small clip from the boot using pliers,
and then move the boot to tie-rod end side.
5) Using a flat-tip screwdriver, remove the band
from boot.
NOTE:
Replace the boot it there is damage, cracks or de-
terioration.
6) Using the ST, loosen the lock nut.
ST
926230000 SPANNER
7) Tighten the adjusting screw until it no longer
tightens.
8) Hold the rack with a wrench [22 mm width across
flats], and then remove the tie-rod using a wrench
[32 mm width across flats] or adjustable wrench.
9) Loosen the adjusting screw, and then remove
the spring and sleeve.
10) Remove the two bolts securing valve assem-
bly.
(1) Clip
(1) Band
(1) Lock nut
(1)
PS-00508
PS-00509
(1)
PS-00494
ST
(1)
(1) Adjusting screw
PS-00495
(1)
PS-00511
PS-00116