Subaru 2004 LEGACY, Service Manual

Page: 545 / 609

PS-26
POWER ASSISTED SYSTEM (POWER STEERING)
Steering Gearbox [LHD Model]
12) Remove the clamp bolts securing gearbox to
crossmember, and remove the clamp.
13) Remove the bolts which secure gearbox brack-
et, and remove the bracket and gearbox.
B: INSTALLATION
1) Insert the gearbox into crossmember, being
careful not to damage gearbox boot.
2) Install the gearbox and bracket. Tighten the bolt
temporarily.
3) Tighten the gearbox to the crossmember bracket
via clamp with bolt temporarily.
4) Tighten the bolts which temporary tightening the
clamp and bracket of gearbox to specified torque.
Tightening torque:
60 N
⋅
m (6.1 kgf-m, 44.1 ft-lb)
5) Connect the pipe D to return hose first, and the
pipe C to pressure hose second.
Tightening torque:
15 N
⋅
m (1.5 kgf-m, 10.8 ft-lb)
6) Install the universal joint. <Ref. to PS-21, IN-
STALLATION, Universal Joint.>
7) Connect the tie-rod end and knuckle arm, and
tighten with castle nut.
(1) Clamp
(1) Bracket
(1) Bracket
PS-00554
(1)
(1)
PS-00555
(1)
PS-00555
(1) Clamp
(1) Pipe C
(2) Pipe D
(3) Pressure hose
(4) Return hose
PS-00554
(1)
PS-00538
(4)
(3)
(2)
(1)