PS-29
POWER ASSISTED SYSTEM (POWER STEERING)
Steering Gearbox [LHD Model]
11) Carefully draw out the input shaft, and then re-
move the valve assembly.
12) Using a drill, release the caulking of holder.
CAUTION:
Make a hole approx. 2 mm (0.08 in) depth using
a drill bit of 3 mm (0.12 in) diameter.
13) Using a spanner [36 mm width across flats] or
adjustable wrench, remove the holder.
14) Remove the rack bushing and rack stopper
from rack assembly.
15) Remove the oil seal from rack.
16) Insert the ST from pinion housing side, and
then remove the oil seal using a press.
ST
34099PA010
OIL SEAL REMOVER (3.0 R
model)
ST
34199AE050
OIL SEAL REMOVER (Except
for 3.0 R model)
17) Using a press, remove the bushing at gearbox
installation portion.
2. CONTROL VALVE
1) Disconnect the pipes A and B from gearbox.
2) Secure the gearbox removed from the vehicle in
vise using ST.
ST1
926200000
STAND
ST2
34199AG000 BOSS D
(1) Holder
PS-00117
PS-00516
PS-00512
(1)
(1) Press
(2) Oil seal
PS-00138
(2)
(1)
ST
PS-00517
Summary of Contents for 2004 LEGACY
