Subaru 2004 LEGACY, Service Manual

Page: 578 / 609

PS-59
POWER ASSISTED SYSTEM (POWER STEERING)
Steering Gearbox [RHD Model]
Installed tie-rod length L:
31 mm (1.22 in)
32) Inspect the gearbox as follows:
“A” Holding tie-rod end, repeat lock to lock two or
three times as quickly as possible.
“B” Holding tie-rod end, turn it slowly at a radius one
or two times as large as possible.
After all, make sure that the boot is installed in the
specified position without deflation.
33) Take off the gearbox from ST.
ST1 926200000
STAND
ST2 34199AG000 BOSS D
34) Install the pipe A and B to steering body and
control valve housing.
Tightening torque:
T1: 20 N
⋅
m (2.0 kgf-m, 14.5 ft-lb)
T2: 24 N
⋅
m (2.4 kgf-m, 17.4 ft-lb)
(1) Pipe A
(2) Pipe B
PS-00097
L
PS-00098
B
A
PS-00500
T1
T2
T1
T2
(2)
(1)