Subaru 2004 LEGACY, Service Manual

Page: 231 / 609

ABS(diag)-15
ABS (DIAGNOSTICS)
Subaru Select Monitor
6. Subaru Select Monitor
A: OPERATION
1. READ DIAGNOSTIC TROUBLE CODE
(DTC)
1) Prepare the Subaru Select Monitor kit. <Ref. to
ABS(diag)-9, SPECIAL TOOL, PREPARATION
TOOL, General Description.>
2) Connect the diagnosis cable to Subaru Select
Monitor.
3) Insert the cartridge to Subaru Select Monitor.
<Ref. to ABS(diag)-9, SPECIAL TOOL, PREPA-
RATION TOOL, General Description.>
4) Connect the Subaru Select Monitor to data link
connector.
(1) Data link connector is located in the lower
portion of the instrument panel (on the driver’s
side).
(2) Connect the diagnosis cable to data link
connector.
CAUTION:
Do not connect the scan tools except for Suba-
ru Select Monitor.
5) Turn the ignition switch to ON (engine OFF) and
turn the Subaru Select Monitor switch to ON.
6) On the «Main Menu» display screen, select the
{Each System Check} and press the [YES] key.
7) On the «System Selection Menu» display
screen, select the {Brake Control} and press the
[YES] key.
8) Press the [YES] key after the {ABS} is displayed.
9) On the «ABS Diagnosis» display screen, select
the {DTC Display} and press the [YES] key.
NOTE:
• For details concerning operation procedure, re-
fer to the “SUBARU SELECT MONITOR OPERA-
TION MANUAL”.
• For details concerning DTCs, refer to the “List of
Diagnostic Trouble Code (DTC)”. <Ref. to ABS(di-
ag)-39, List of Diagnostic Trouble Code (DTC).>
• DTCs are displayed up to three in detected or-
der.
• If a particular DTC is not properly stored in mem-
ory (due to a drop in ABSCM&H/U power supply,
etc.) on the occurrence of a problem, the DTC
which is suffixed with a question mark “?” appears
on the Subaru Select Monitor display. This shows it
may be an unreliable reading.
10) If ABS and Subaru Select Monitor cannot com-
municate, check the communication circuit. <Ref.
to ABS(diag)-18, COMMUNICATION FOR INI-
TIALIZING IMPOSSIBLE, INSPECTION, Subaru
Select Monitor.>
(1) Data link connector
ABS00111
ABS00112
ABS00465
(1)
(1) Power switch
ABS00114
(1)