Subaru 2004 LEGACY, Service Manual

Page: 584 / 609

PS-65
POWER ASSISTED SYSTEM (POWER STEERING)
Pipe Assembly [LHD Model]
7. Pipe Assembly [LHD Model]
A: REMOVAL
1) Disconnect the ground cable from battery.
2) Lift-up the vehicle, and then remove the front
crossmember support plate and jack-up plate.
3) Remove one pipe joint at the center of gearbox,
and connect the vinyl hose to the pipe and the joint.
Discharge the fluid by turning steering wheel fully
clockwise and counterclockwise. Discharge the flu-
id similarly from other pipes.
4) Remove the clamp E from return hose and pres-
sure hose.
5) Disconnect the return hose and pipe D, pressure
hose and pipe C.
6) Remove the air intake duct. <Ref. to
IN(H4DOTC)-9, REMOVAL, Air Intake Duct.>
<Ref. to IN(H4SO 2.0)-9, REMOVAL, Air Intake
Duct.>
7) Disconnect the suction hose and pressure hose
from oil pump.
(1) Front crossmember support plate
(2) Jack-up plate
(1) Pipe A
(2) Pipe B
(1) Return hose
(2) Pressure hose
(3) Clamp E
FS-00105
(2)
(1)
(1)
(2)
PS-00553
(1)
PS-00537
(3)
(1)
(2)
(1) Pipe C
(2) Pipe D
(3) Pressure hose
(4) Return hose
(1) Suction hose
(2) Pressure hose
PS-00538
(4)
(3)
(2)
(1)
(1)
PS-00460
(2)