Subaru 2004 LEGACY, Service Manual

Page: 572 / 609

PS-53
POWER ASSISTED SYSTEM (POWER STEERING)
Steering Gearbox [RHD Model]
20) Set the stopper to gearbox, and then insert the
tip of ST to gearbox.
21) By fixing the 2-surface width, press-in by rotat-
ing the rod and attach to oil seal.
22) While fixing the 2-surface width, pull out the oil
seal by rotating nut.
CAUTION:
Take care not to scratch the gearbox inner sur-
face.
D: ASSEMBLY
1) Apply a coat of grease to the inside and outside
of new oil seal.
Steering grease:
VALIANT GREASE M2 (Part No. 003608001)
2) Verify the oil seal direction and installation posi-
tion. Using the ST and press, press-fit the oil seal to
gearbox.
ST 34199AE130
GEARBOX OIL SEAL IN-
STALLER
(1) Stopper
(2) Oil seal
(1) Rod
(2) 2-surface width
PS-00070
PS-00071
(1) 2-surface width
(2) Nut
(1) Oil seal
PS-00072
PS-00073