38
All available channels are listed at the left of the screen. The current program of the currently
selected channel is listed at the top of the right panel, with the programs to follow listed below it.
Two modes are available: daily and weekly. Extended information is available about some of the
programs.
You can also set up to eight timers from the EPG. A timer is a time at which the program on a
specified channel automatically comes on (or a pre-defined message appears on the screen).
Opening the EPG
1. Press
EPG
on the remote control. The current channel is highlighted (at the left) and the current
and next programs are shown at the right. The current program is also highlighted.
2. To choose a different channel, press
VOL
e
or
VOL
f
and then press
CH
▼
or
CH
▲
until the
channel you are interested in is highlighted. Note that as you scroll through the channels, the
current and next programs are displayed at the right of the screen.
3. To display extended information about a displayed program, press
VOL
e
or
VOL
f
to highlight
the first program. If necessary, press
CH
▼
or
CH
▲
until the program you are interested in is
highlighted. Now press the yellow button on the remote control to display extended information
about the highlighted program.
When you are finished with the extended information, press
EXIT
.
4. To select a channel for watching, select it in the list of channels at the left of the screen and
press
OK
.
5. Close the EPG by pressing
EXIT
.
Daily and Weekly modes
The EPG illustrated above is in daily mode. Only the programs for the current day are shown. To see
programs for the rest of the week (and subsequent weeks), you need to display the EPG in Weekly
mode.
To display Weekly mode, open the EPG and press the green button on the remote control.
