11
Quick Start
This section explains how you can quickly set up your
using the cables provided. For
detailed instructions, see How to Connect” on page 12.
Install batteries in the remote control. See page 10.
Connect the
to the antenna wall plate. See page 12.
Using the supplied Component cable (blue–red–green) or the yellow lead of the
supplied Composite cable, connect the
to the TV. Make sure you match
the colour of a lead with the colour of a socket. (This step provides video output to your
TV.) See “Step 2: Choose an installation method” on page 12.
Connect the white and red leads of the Composite cable between the
and the TV, again matching the colour of a lead with the colour of a socket. (This step
provides audio output to your TV.) See “Step 2: Choose an installation method” on
page 12.
Turn on the
and the TV. The Strong Technologies banner appears on your TV
screen, followed by
Init Install
window. Choose your preferred on-screen display
language. See “Minimum Set-up” on page 14.
When asked if you want to install, press
OK.
The
automatically scans for
digital broadcasters in your area. When the scanning is finished, the menu closes and a
local digital TV channel will be showing.
See “Basic operations” on page 22 for general instructions on using the
to
select TV channels and radio stations.
1
2
3
4
5
6
