Star Microwave SM Cirius AO, Installation Manual

Page: 49 / 85

Step Action
3 Insert the four wall wood plugs in the drilled holes in the wall
surface.
4 Insert the four wood screws through the respective holes on the
PoE.
5 Use the tool (item 1) to fully tighten the 4 screws to secure the
mounting device on the wall surface.
6 Connect the grounding cable between PoE& grounding bar.
7 Use the tool (item 1) to reinstall the cover of PoE device.
End of procedure
5 CABLING INSTALLATION
5.1 POE CABLING INSTALLATION
5.1.1 INSTALLING GBE ELECTRICAL FOR TRAFFIC & POWER
Prerequis ites
See below the prerequisites before starting S-FTP cable installation to PoE device:

PoE device should be grounded to the grounding bar.

Availability of 2 x S-FTP Cables terminated to RJ-45 jack.

S-FTP Cable length restrictions, as follows:
o
Due to Electrical ETH limitation the S-FTP cable length between SM CIRIUS AO up to
network equipment should not exceed 100 m.
O
Due to Power limitation the S-FTP cable length between SM CIRIUS AO up to PoE OUT
receptacle should not exceed the following distances:
Num. of S-FTP Cables One Cable Two Cables
(Power in parallel
Voltage supply at PoE input -40.5 to -60 V -40.5 to -60 V -45.5 to -60 V
Freq. Band 8 GHz
50 m 100 m 200(*) m
Freq. Band 11 GHz
75 m 150 m(*) 200(*) m
Freq. Band 13-38 GHz
100 m 200 m(*) -