Star Microwave SM Cirius AO, Installation Manual

Page: 52 / 85

5.2 INSTALLING FE FOR OUTBAND MANAGEMENT & POWER
Prerequisites
See below the prerequisites before starting S-FTP cable installation to PoE device:

PoE device should be grounded to the grounding bar.

Availability of 2 x S-FTP Cables terminated to RJ-45 jack.

S-FTP Cable length restrictions, as follows:
o
Due to Electrical ETH limitation the S-FTP cable length between SM CIRIUS AO up to
network equipment should not exceed 100 m.
o Due to Power limitation the S-FTP cable length between SM CIRIUS AO up to PoE OUT
receptacle should not exceed the following distances:
Num. of S-FTP Cables One Cable Two Cables
(Power in parallel
Voltage supply at PoE input -40.5 to -60 V -40.5 to -60 V -45.5 to -60 V
Freq. Band 8 GHz
50 m 100 m 200(*) m
Freq. Band 11 GHz
75 m 150 m(*) 200(*) m
Freq. Band 13-38 GHz
100 m 200 m(*) -
Tools
See below the required tools and materials for connecting Ethernet (S-FTP) cables into PoE
device for outband management & power
(see list in chapter Installation Tools , on page 12 ):

Item 1