4 POE INSTALLATION
4.1 INSTALLING POE ONTO POLE
Prerequis ites
The pole, onto which the PoE will be mounted, should have up to 50 mm outer diameter.
Tools
See below the required tools for mechanical installation of the PoE device onto pole (see list in
chapter
Installation Tools
, on page
12
):
Item 1
Item 2 (AZ-5.5)
Item 3
Item 6
Materials
See below the required materials for mechanical installation of the PoE device onto pole
(see list in paragraph
PoE device
on page
15
)
Item
A
(see list in paragraph
PoE
pole mounting kit on page
15
)
Items
A
up to
G
Procedure
Step
Action
1
Use the tool (item 3) to mount the PoE device onto its bracket with
the two screws on the back side of PoE (1 & 2), as shown below:
Summary of Contents for SM Cirius AO
