Stahl EC-940-DUA Series, Instruction Manual

Page: 54 / 606

EN - English - I
nstruc
tion manual
52 MNTCMPXT_1824_EN
9.6.10 Thermal Camera Menu
1.
Configuration:
To set one of the preset
configurations of the thermal camera.
•
Standard:
Sets the standard configuration of
the thermal camera.
•
High Gain:
Sets the configuration for a
higher-resolution image.
•
Isotherm:
Sets the configuration for
highlighting objects within a given
temperature range (9.6.10.9 Thermal Analysis
Menu (Isotherm), page 59).
•
Custom:
It indicates that the operator has
manually chosen the configuration of the
thermal camera.
2. Flat Field Correction: Allows access to the Flat
Field correction management submenu.
3. Video Setup: Allows access to the video
configuration management submenu.
4. Gain control: Allows access to the gain control
management submenu.
5. ROI Setup: Allows access to the ROI
management submenu.
6.
Thermal Analysis:
Allows access to the thermal
analysis management submenu.
7.
Status:
Allows access to the submenu
containing the technical features of the thermal
camera.
8. Control: Sets the type of control on the thermal
camera.
•
Internal Control: The camera configuration is
managed by the pan & tilt.
• External Control: The camera configuration
is managed through the serial line RS-485-
2 (only for models with double camera).
Configure the serial line as described in the
relative chapter (6.15.1 Two-way RS-485 TX/
RX line, page 27). The control software must
be configured to communicate at a baud rate
of 57600.
THERMAL CAMERA
------------------------
1>CONFIG. : STANDARD
2 FLAT FIELD CORRECTION>
3 VIDEO SETUP >
4 GAIN CONTROL >
5 ROI SETUP >
6 THERMAL ANALYSIS >
7 STATUS >
8 CONTROL : INTERNAL
Fig. 101