Stahl EC-940-DUA Series, Instruction Manual

Page: 35 / 606

Instruc
tion manual - English - EN
33 MNTCMPXT_1824_EN
9 Configuration
9.1 Using the OSM
During normal operation of the unit, you can activate
the OSM to select and configure advanced functions.
For further information, refer to the manual of the
keyboard used and to the relative chapter. (10.12
Special controls, page 66).
Exit the OSM with Wide Zoom (Zoom-).
9.1.1 How to use the joystick
All operations in the menus are carried out using the
joystick.
Left
Up
Right
Down
Fig. 50 Pan & tilt.
Exit
Fig. 51 Wide Zoom and Tele Zoom.
If you use control keyboards with 2-axes
joystick, use the Wide Zoom and Tele Zoom
buttons to Exit and Confirm.
9.2 How to move around the
menus
Each page of the OSM shows a list of parameters
or sub-menus that can be selected by the operator.
Move the cursor with the joystick (up and down) to
scroll the various parameters .
ADVANCED
------------------------
1 ZOOM SPEED : 7
2>DIGITAL ZOOM : N
3 WIDE DYNAMIC : Y
4 HIGH RESOLUTION: N
5 BACKLIGHT COMP.: Y
6 FOCUS >
7 EXPOSURE >
8 INFRARED >
9 WHITE BALANCE >
Fig. 52
The symbol > at the end of a line indicates the
presence of a specific submenu. To enter the
submenu just confirm the menu item. To exit the
submenu use the Exit function (Zoom Wide).
ADVANCED
------------------------
1 ZOOM SPEED : 7
2>DIGITAL ZOOM : N
3 WIDE DYNAMIC : Y
4 HIGH RESOLUTION: N
5 BACKLIGHT COMP.: Y
6 FOCUS >
7 EXPOSURE >
8 INFRARED >
9 WHITE BALANCE >
Fig. 53
Confirm