Stahl EC-940-DUA Series, Instruction Manual

Page: 47 / 606

Instruc
tion manual - English - EN
45 MNTCMPXT_1824_EN
9.6.3.13 Advanced Setting Menu (Other)
1. Sharpness: Sets the sharpness value of the
image.
2.
High Resolution:
Enables the High Resolution
function. The output video signal has a higher
resolution.
3. Wide Dynamic: Enables the Wide Dynamic
function. It improves vision when some zones
within the frame are much brighter than others.
4. Stabilizer: Enables the electronic image
stabilization function.
5. Progressive Scan: Enables the Progressive Scan
function. Gives a more stable image when the
Pan & Tilt is connected to a video server.
6.
Noise Reduction:
Sets the noise reduction
level. Vary the parameter according to the
environmental conditions to obtain a higher
contrast image.
7.
Backlight Compensation:
Enables the
Backlight Compensation function. It improves
vision of any dark zone in the image.
OTHER
------------------------
1 SHARPNESS : 6
2 HIGH RESOLUTION : N
3 WIDE DYNAMIC :
AUTO
4 STABILIZER : N
5 PROGRESSIVE SCAN: N
6 NOISE REDUCTION : 2
7 BACKLIGHT COMP. : N
Fig. 82
9.6.4 Movement Menu
1.
Configuration
: Sets one of the default
configurations of the pan & tilt.
•
Standard
: Sets the standard movement
speed.
•
Low Speed
: Sets the Low Speed mode that
slows down all pan & tilt operating speeds.
•
Wind Mode
: Sets the movements speed
to adjust them to environments subject to
vibrations and/or windblasts.
• High Perf : Establishes that all the movements
are carried out at the maximum possible
speed.
•
Custom
: It indicates that the user has
manually selected the movement speeds of
the unit.
2. Offset Pan : The pan & tilt has a mechanically
defined 0° position. The Offset Pan function
allows the definition of a different 0° position
using software.
3.
Manual Control
: To access the submenus
operating the parameters associated with the
manual movements of the device.
4. Preset : To access the submenus used to to edit
Preset values.
5. Patrol : To access the submenus used to edit
Patrol values.
6. Autopan : To access the submenus used to edit
Autopan values.
7. Motions Recall : To access the submenu which
manages automatic load of the movements.
8.
Advanced
: Allows access to the advanced
settings submenu.
MOTION
------------------------
1>CONFIG. : STANDARD
2 OFFSET PAN: + 0.00
3 MANUAL CONTROL >
4 PRESET >
5 PATROL >
6 AUTOPAN >
7 MOTIONS RECALL >
8 ADVANCED >
Fig. 83