manualshive.com logo in svg

Staheli West DewPoint 331, Owner'S Manual, Page: 69 / 216

Share
Download
Staheli West DewPoint 331 Owner'S Manual Download Page 69

©  2021 Staheli West

60

Tes

ts

Tes

ts

Main

tenance

Main

tenance

Tr

oubleshooting

Tr

oubleshooting

Technic

al 

In

forma

tion

Technic

al 

In

forma

tion

Oper

ation

Oper

ation

Pr

e-Oper

ation

Requir

emen

ts

Pr

e-Oper

ation

Requir

emen

ts

Sa

fe

ty
Sa

fe

ty

Water Purge System

The water purge actuator opens when the water purge sensor detects water. The water purge icon will light up 

blue on the touch screen while the valve is open. The water purge valve will stay open for at least 15 seconds 

whenever water is detected by the water purge sensor. The water purge valve will close when 15 seconds has 

elapsed and when the water purge sensor is no longer detecting the water.

The purpose of the water purge system is to prevent water from carrying over the steam hoses and into the 

hay. It opens the water purge actuator which purges excess water in the steam manifold back into the right 

rear supply tank.

If the water purge system gets clogged, “Fault 1305: Water Purge Is Clogged” will appear. The operator should 

inspect the water purge path and clear any blockages. This fault will not prevent the machine from working but 

the problem should be addressed soon.

The water purge valve is open when the 

“Water Purge” indicator is blue

Water Purge 

Sensor

Water Purge 

Actuator

Summary of Contents for DewPoint 331

























































































































































































































Reviews:

No comments