manualshive.com logo in svg

Staheli West DewPoint 331, Owner'S Manual, Page: 60 / 216

Share
Download
Staheli West DewPoint 331 Owner'S Manual Download Page 60

©  2021 Staheli West

51

Tes

ts

Tes

ts

Main

tenance

Main

tenance

Tr

oubleshooting

Tr

oubleshooting

Technic

al 

In

forma

tion

Technic

al 

In

forma

tion

Oper

ation

Oper

ation

Pr

e-Oper

ation

Requir

emen

ts

Pr

e-Oper

ation

Requir

emen

ts

Sa

fe

ty
Sa

fe

ty

Common Valve Settings

When a windrow is evenly cured, start with the 

Steam Ratio Indicator in the middle and the 

steam rate at 40%. Adjust steam rate as needed.

When a windrow has more moisture on top than 

on bottom, start with the Steam Ratio Indicator 

closer to the bottom and the steam rate at 40%. 

Adjust steam rate as needed.

When a windrow has more moisture on bottom 

than on top, start with the Steam Ratio Indicator 

closer to the top and the steam rate at 40%. 

Adjust steam rate as needed.

When baling in hot and dry conditions, start with 

the Steam Ratio Indicator in the middle and the 

steam rate at 100%. Adjust steam rate as needed.

Windrow Evenly Cured 

Top to Bottom

Windrow with More Moisture

on Bottom than Top

Windrow with More Moisture 

on Top than Bottom

Hot and Dry Conditions

Summary of Contents for DewPoint 331

























































































































































































































Reviews:

No comments