manualshive.com logo in svg

Staheli West DewPoint 331, Owner'S Manual, Page: 12 / 216

Share
Download
Staheli West DewPoint 331 Owner'S Manual Download Page 12

Warranty Information

All DewPoint machines come with a 1-Year Limited Warranty. This voluntary manufacturer’s warranty covers 

everything on the machine against manufacturing defects. Normal wear-and-tear items and problems caused 

by operator negligence or operator error are not covered. 

The warranty period for the DewPoint machine starts from the date of first use.

Staheli West Parts offers a 1-year warranty on all parts from the date of purchase. Staheli West Parts does not 

cover labor costs of replacing a warrantied part.

Warranty will not be honored if routine maintenance has not been performed.

To ensure warranty coverage, use only OEM parts and filters.

DewPoint Machine

Warranty Period

Coverage

Months

Hours

Parts

Labor

0-12

Unlimited

100%

100%

Tes

ts

Tes

ts

Main

tenance

Main

tenance

Tr

oubleshooting

Tr

oubleshooting

Technic

al 

In

forma

tion

Technic

al 

In

forma

tion

Oper

ation

Oper

ation

Pr

e-Oper

ation

Requir

emen

ts

Pr

e-Oper

ation

Requir

emen

ts

Sa

fe

ty
Sa

fe

ty

Summary of Contents for DewPoint 331

























































































































































































































Reviews:

No comments