manualshive.com logo in svg

Staheli West DewPoint 331, Owner'S Manual, Page: 201 / 216

Share
Download
Staheli West DewPoint 331 Owner'S Manual Download Page 201

©  2021 Staheli West

192

Tes

ts

Tes

ts

Main

tenance

Main

tenance

Tr

oubleshooting

Tr

oubleshooting

Technic

al 

In

forma

tion

Technic

al 

In

forma

tion

Oper

ation

Oper

ation

Pr

e-Oper

ation

Requir

emen

ts

Pr

e-Oper

ation

Requir

emen

ts

Sa

fe

ty
Sa

fe

ty

Winterize

1

3

5

2

4

6

Park machine on slight incline to make the draining 

process easier.

While the boiler is under pressure, open all four 

pigtail valves one at a time. This purges any water/

debris out of the pigtail valves.

Turn off the tractor and the valves will stay open. The 

next time the key is turned on the valves will close 

automatically.

For quicker drying, start the machine and heat water 

until the steam purge opens

Go to Manual Mode and open the valves (Menu > 

Inputs/Outputs). This will depressurize the boiler. 

Caution: Steam will come out of steam hoses.

Open the supply water valve to drain the supply tanks.

Summary of Contents for DewPoint 331

























































































































































































































Reviews:

No comments