manualshive.com logo in svg

Staheli West DewPoint 331, Owner'S Manual, Page: 66 / 216

Share
Download
Staheli West DewPoint 331 Owner'S Manual Download Page 66

©  2021 Staheli West

57

Tes

ts

Tes

ts

Main

tenance

Main

tenance

Tr

oubleshooting

Tr

oubleshooting

Technic

al 

In

forma

tion

Technic

al 

In

forma

tion

Oper

ation

Oper

ation

Pr

e-Oper

ation

Requir

emen

ts

Pr

e-Oper

ation

Requir

emen

ts

Sa

fe

ty
Sa

fe

ty

Keep Hot

Keep hot should be used whenever the machine is subjected to less than 32° F (0° C) temperatures.

To initiate keep hot, start the machine like normal. After the machine has reached operating pressure (the 

steam purge valve will blow steam), press the Hold/Pause button. Leave the tractor and steamer running the 

entire time the machine will be subjected to below freezing temperatures.

Using keep hot will prevent sensors, plumbing, and other components on the steamer from freezing.

Summary of Contents for DewPoint 331

























































































































































































































Reviews:

No comments