© 2021 Staheli West
30
DewPoint Machine Preparation
Install Optional/Custom Equipment
●
Install custom wire harnesses
□ Gazeeka, preservative applicator, etc.
●
Install custom hydraulic lines
●
Install any other custom equipment
Install Cameras on DewPoint Machine
●
With rear door opened:
□ ATTACH 2 magnetic base cameras just below the hole to the inside each tail/work light assembly on
each side of the DewPoint machine
□
CONNECT camera cable to each camera and route secure each cable through the grommets
mounted in each fender and in the inner fender walls as needed
□ FOLLOW the routing of the wire harnesses that run to the tail/work light assemblies, so the end of
each cable is inside the pump enclosure area inside the rear door of the machine
□
CONNECT the end of each camera cable to the camera extension cables which are just inside and
below the rear door.
□ Use cable zip ties to secure all camera cables to the wire harnesses that run to the tail/work light
assemblies
Pickup
Pickup
Bale Chute
PSI Gauge / Knotters
OR
Summary of Contents for DewPoint 331
Page 213: ... 2021 Staheli West 204 Notes ...
Page 214: ... 2021 Staheli West 205 Notes ...
Page 215: ... 2021 Staheli West 206 Notes ...