C:4
Measurement techniques always included
B
C
RPM measurement
RPM, optical:
Distance 30 to 2000 mm.
Measuring angle 5 to 75°
Reflecting
tape
RPM, contact centre
Hold it against the shaft centre
TAD-11 Short, 30 mm
TAD-15 Long, 60 mm
TAD-19 Extra long, 170 mm
Peripheral, contact wheels
Multiply the reading by the wheel factor:
TAD-12 0.1 m/min. (factor 10)
TAD-13 0.1 yd./min. (factor 10)
TAD-17 0.5 ft./min
. (factor 2)
The SPM laser tachometer/IR temperature probe TTP10 is used for both optical and contact RPM
measurement. It is connected to the transducer input marked RPM on Leonova.
A blue LED indicator on the Tachometer and Temperature probe TTP10 lights when reflected ligth
hits the sensor.
TTP10
CAB90
Stroboscope cable, 1.5 m spiral,
3.5 mm phones connector
CAB92
Proximity switch cable, 1.5 m
spiral, M12 connector
CAB95
Keyphasor cable, 1.5 m spiral,
BNC connector
5–75°
Input for tachometer/tem
-
perature probe TTP10
Summary of Contents for leonova emerald
