SPM leonova emerald, User Manual

Page: 39 / 170

General measurement functions
B:5
B
Measuring point data settings
1
2
Measurement with default files is used for a ‘once
only’ check, where you do not need to save the
measuring result. Default files are available for all
measuring techniques and are activated with the
menu option ‘Create default settings’ under MENU
> Settings.
• Select a measurement function from one of the
tabs. In this example, ‘User defined’ is selected
(1). On the selected tab, pick one of the default
files (2).
• Mark the file and press the ENTER key to open
the measurement function. Press the MENU key
> ‘Measuring point data’ > ENTER to display the
available settings.
• In this example (temperature measurement), the
only setting available is ‘Variable speed’ (3). This
can be activated if you want to measure RPM in
conjunction with the temperature measurement.
Use the UP/DOWN arrow keys to mark this setting
and press enter to activate it.
• Close ‘Measuring point data’. Connect the probe,
measure and check the result. If you choose to
save the measuring result, you can view it under
‘Graphics’ while the file is still open.
3
Measurement with default files