B:14
General measurement functions
B
The measuring sequence
Default files
1
Select a file (technique menu).
2
Open the file.
• Open ‘Measuring point data’.
• Edit ‘Measuring point data’, all parameters.
• Close ‘Measuring point data’.
3
Connect the transducer.
4
Press the MEASURE/SAVE (M/S) key to start
the measurement. Press MEASURE/SAVE (M/S)
again to save the measuring result. To measure
repeatedly without saving in between, press the
M/S key down for 2 seconds. Set a comment if
needed.
5. To remove unwanted results, go to MENU >
‘Measuring results’ > Delete result (F3).
6
Close the file with MENU > ‘Close’ (which closes
the default file without saving), or use ‘Save as’
to save it as a user/new default file.
Files configured in Condmaster
1
Select a file (FILE menu).
2
Open the file and select a measuring point.
3
Connect the transducer.
4
Press the MEASURE/SAVE (M/S) key to start
the measurement. Press MEASURE/SAVE (M/S)
again to save the measuring result. To measure
repeatedly without saving in between, press the
M/S key down for 2 seconds. Set a comment if
needed.
5. To remove unwanted results, go to MENU >
‘Measuring results’ > Delete result (F3).
6
Close the file with MENU > ‘Close’ with or
without saving.
Measuring with Leonova, especially data logging with downloaded, fully configured files, is very
easy.
RPM measurements in measuring rounds
In rounds containing several measuring points, the RPM value of the preceding measuring point is
automatically suggested for the next measuring point if the settings match each other (Min/ Max
RPM must match, or Min/Max Speed and Unit for speed must match).
Summary of Contents for leonova emerald
