SPM leonova emerald, User Manual

Page: 15 / 170

A
General instrument functions
A:11
General settings
The files under ‘Settings’ cannot be moved, re-
named or deleted. Select with UP/DOWN arrow
keys, open with ENTER.
‘General settings’ has its own menu bar (1).
Select tab (1) with F1/F2. Move in the list with the
UP/DOWN arrow keys, mark/unmark with ENTER.
Marking the box (2) changes from mm to
inch, acceleration in g, from °C to °F and
from Hz (Hertz = cycles per second) to
CPM (cycles per minute, similar to rpm).
Marking a dB mode (3) will change the y-
scale to decibell.
1
2
4
5
3
‘Use temporary file’ will save the round temporary
while saving.
‘Preview live spectrum’ will show spectrum in real
time.
‘Low resolution warning’ when the resolution is
too low for an accurate result.
‘Possible to determine rpm from spectrum’ makes
it possible to get the rpm by setting out a marker
in the spectrum.
‘Default FFT calculation for SPM HD’ is normally
selected. If turned off it affects all SPM HD and
LR/HR HD assignments.
When ‘Large icons’ (4) is not marked,
files are listed as shown above (5).