F
F:14
Rotor balancing
The calculation results are the mass of the
balancing weight and the angle defining the
position where it has to be attached.
The display shows the direction of rotation and
the position of 90°.
On the side of the display (1) there is a row of
function keys that allow you to select alternatives
to adding mass at the indicated spot (see next
page).
After completion of a balancing operation,
the balance quality can be compared to the
ISO 1940-1 standard, specifying permissible
residual balance for rigid rotors. Press the F4
(‘ISO 1940-1’) (2) key to open the function. This
function is only avaliable for Single plane, 2
runs (RPM is always measured in this method,
which is a requirement for the comparison with
‘ISO 1940-1’).
Display of results
Calculation results, 4-run method
0°
1
Calculation results, 2-run method
2
Summary of Contents for leonova emerald
