Spirent TestCenter Getting Started With Download | Manualshive

Page: 77 / 86

background image

Appendix B: Upgrade/Downgrade Procedures

About Installing on Linux® Workstations

Getting Started with Spirent TestCenter

|

77

About Installing on Linux

®

Workstations

The instructions in this section support installation of Spirent TestCenter applications on a
computer running a supported version of Linux. An installation may be either an upgrade
or a downgrade. Refer to the Spirent TestCenter release notes for information about
supported versions.

Notes: •

The Spirent TestCenter Application Windows version is required for chassis
and test module firmware management. Linux customers must install the
Spirent TestCenter Application on a computer running a supported version of
Windows, and then install the appropriate Linux version of the application on
a workstation.

Upgrade steps using a

Linux Workstation

These steps are described in detail in the following pages.

1

Install Spirent TestCenter Applications and select a Tcl option (see note)

2

Download chassis, module, and test package firmware files

3

Set up STC directory

4

Copy installer to workstation

5

Run installer

6

Set up Automation

You can install the software using either option:

“Installation Option 1: Using the DVD” on page 73

“Installation Option 2: Using the Website” on page 74

Note:

For Spirent TestCenter Automation customers. Customers have the choice of

downloading “Tcl configured for Spirent TestCenter” from the Spirent Customer Service
website (

h ttps://support.spirent.com

), updating/configuring an existing Tcl installation, or

manually setting up an existing Tcl installation to work with Spirent TestCenter.

Appropriate licensing is required to use any Spirent TestCenter application for testing. If
you have questions about Spirent TestCenter licenses or about Support Entitlement,
contact

[email protected].

To find out how to verify Support Entitlement status, see

“To Verify Support Entitlement” on page 71

Tip:

Version requirements for supported scripting/programming languages (Tcl,

C++,

Java, Perl, Ruby, Python, C#, or REST) and operating systems (Windows, Linux)

are included

in the

Release Notes.

Release notes are available on the Spirent Customer Service Center

website (

htt ps://support.spirent.com

).

«
...
75
76
77
78
79
...
»

Summary of Contents for TestCenter























































































Reviews:

No comments

Related manuals for TestCenter

i-bus KNX IPR/S 3.5.1

Brand: ABB Pages: 44

Brand: Makita Pages: 2

EK-Vector Radeon RX5700 + XT Backplate

Brand: ekwb Pages: 7

kontron COMe-cEL6

Brand: S&T Pages: 99

Brand: T.A Pages: 11

Brand: Hama Pages: 6

Brand: NETGEAR Pages: 2

Brand: Perle Pages: 2

Brand: TP-Link Pages: 7

Brand: CNC4PC Pages: 11

Brand: Nilox Pages: 66

Brand: XAVI Technologies Corp. Pages: 63

NC-MCO - TECHNICAL

Brand: Crest Audio Pages: 2

ipRocketLink 3101 Series

Brand: Patton Pages: 119

JetNet 5720G-8P Series

Brand: Korenix Pages: 52

Brand: TP-Link Pages: 2

Brand: National Instruments Pages: 147

BNC-08DI, BNC-16DI, BNC-16SE

Brand: Omega Engineering Pages: 25

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands